Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 268 of 277
DATA SYNC
Besides local backup, users could backup the voice records/voice mails/CDR/FAX in a daily basis to a
remote server via SFTP protocol automatically under web GUI->Maintenance->Backup->Data Sync.
Figure 144: Data Sync
Table 89: Data Sync Configuration
Enable Backup
Enable the auto backup function. The default setting is "No".
Account
Enter the Account name on the SFTP backup server.
Password
Enter the Password associate with the Account on the SFTP backup
server.
Server Address
Enter the SFTP server address.
Backup Time
Enter 0-23 to specify the backup hour of the day.
Before saving the configuration, users could click on "Test Connection". The UCM6510 will then try
connecting the server to make sure the server is up and accessible for the UCM6510.
Save the changes and all the backup logs will be listed on the web page.
RESTORE CONFIGURATION FROM BACKUP FILE
To restore the configuration on the UCM6510 from a backup file, users could go to web
GUI->Maintenance->Backup->Backup / Restore.

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English