Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 73 of 277
 Contact List: configure LDAP and XML phonebook download.
 Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
 Network Settings: configure IP address, QoS and STUN settings.
 Customization: customize LCD screen wallpaper for the supported models.
Figure 36: Global Policy Categories
Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for
this parameter.
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 20: Global Policy Parameters: Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
Time Zone
Configure the time zone used on the SIP end device.

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English