Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
outbound rule privilege is disabled, this option will not take effect.
Configure the password for the user. A random secure password will be
automatically generated when the extension is created. It is recommended
to use this password or other strong password for security purpose.
Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated. It
is recommended to use the random generated password for security
purpose.
Call Forward Unconditional
Configure the Call Forward Unconditional target number so that the
incoming call to this extension will be always forwarded to the target
number. If not configured, the Call Forward Unconditional feature is
deactivated. The default setting is deactivated.
Select time condition for Call Forward Unconditional. CFU takes effect only
during the selected time condition. The available time condition are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time
or Holiday” and “Specific”.
Note:
“Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward No Answer target number so that the incoming
call to this extension will be forwarded to the target number if the call is not
answered until the ringing times out. If not configured, the Call Forward No
Answer feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward No Answer. The available time
condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
“Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time