Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 105 of 277
User Settings
First Name
Configure the first name of the user. The first name can contain characters,
letters, digits and _.
Last Name
Configure the last name of the user. The last name can contain characters,
letters, digits and _.
Email Address
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Language
Select the voice prompt language to be used for this extension. The default
setting is "Default" which is the selected voice prompt language under web
GUI->PBX->Internal Options->Language. The dropdown list shows all
the current available voice prompt languages on the UCM6510. To add
more languages in the list, please download voice prompt package by
selecting "Check Prompt List" under web GUI->PBX->Internal
Options->Language.
Ring Simultaneously
Ring Simultaneously
Once this mode is enabled, it will allow the user’s extension and external
number ring simultaneously during an incoming call. If user used register
trunk for outbound call, the caller will display the register number. This
mode is disabled by default.
External Number
Once this number is set and Ring Simultaneously mode is enabled, for an
incoming call, both external and extension number will be ringed
simultaneously. The “-“ will be ignored in the field when the external
number is filled in.
Time Condition for Ring
Simultaneously
Select time condition for Ring Simultaneously. The available time condition
are “All Time”, “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific Time”.
IAX Settings
Max Number of Calls
Configure the maximum number of calls allowed for each remote IP
address.
Require Call Token
Configure to enable/disable requiring call token. If set to "Auto", it might
lock out users who depend on backward compatibility when peer
authentication credentials are shared between physical endpoints. The
default setting is "Yes".
Other Settings
SRTP
Enable SRTP for the call. The default setting is disabled.
Fax Detection
Enable to detect Fax signal from the user/trunk during the call and send
the received Fax to the Email address configured for this extension. If no
Email address can be found for the user, send the received Fax to the

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English