Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
A 3
rd
Gigabit port for Hot-Standby Clustering
Power 1/2, PoE, USB, SD, T1/E1/J1, FXS 1/2, FXO 1/2, LAN, WAN,
Cluster Heartbeat
128x32 dot matrix graphic LCD with DOWN and OK buttons
Yes, long press for factory reset and short press for reboot
LEC with NLP Packetized Voice Protocol Unit, 128ms-tail-length carrier
grade Line Echo Cancellation, Dynamic Jitter Buffer, Modem detection and
auto-switch to G.711
G.711 A-law/U-law, G.722, G.723.1 5.3K/6.3K, G.726, G.729A/B, iLBC,
GSM, AAL2-G.726-32, ADPCM; T.38
In Audio, RFC2833, and SIP INFO
Provisioning Protocol and
TFTP/HTTP/HTTPS, auto-discovery & auto-provisioning of Grandstream
IP endpoints via ZeroConfig (DHCP Option 66/multicast SIP
SUBSCRIBE/mDNS), eventlist between local and remote trunks
TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DDNS, DHCP, NTP, TFTP,
SSH, HTTP/HTTPS, PPPoE, SIP (RFC3261), STUN, SRTP, TLS, LDAP,
HDLC, HDLC-ETH, PPP, Frame Relay
Call Progress Tone, Polarity Reversal, Hook Flash Timing, Loop Current
Disconnect, Busy Tone
Fail2ban, alert events, Whitelist, Blacklist, strong password based access
control
Input: 100-240VAC, 50-60Hz; Output: DC+12VDC, 1.5A
Unit Weight: 2.165 KG; Package weight: 3.012 KG
440mm (L) x 185mm (W) x 44mm (H)