Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 258 of 277
-OR-
caller=5300&caller=5302-5304&
caller=_4@
(Matches extensions 5300, 5302,
5303, 5304, and any extension
containing 4 as the second
digit/character).
'_' matches any single character. Otherwise, patterns
containing a single hyphen will be matching a range of
numerical extensions, with non-numerical characters
ignored, while patterns containing multiple hyphens will
be ignored. (The pattern "0-0" will match all
non-numerical and empty strings).
startTime
Date and/or time of day in any of
the following formats:
YYYY-MM-DDTHH:MM
YYYY-MM-DDTHH:MM:SS
YYYY-MM-DDTHH:MM:SS.SSS
(literal 'T' character separator in
above three formats)
HH:MM
HH:MM:SS
HH:MM:SS.SSS
now
DDDDDDDDDD
Filters based on the start (call start time) value. Calls
which start within this period (inclusive of boundaries) will
match, regardless of the call answer or end time. An
empty value for either field will be interpreted as range
with no minimum or maximum respectively.
Strings without a date have a default value of
2000-01-01. Strings without a time of day have a default
value of of 00:00 UTC, while strings with a time of day
specified may also optionally specify a time zone offset -
replace '+' in time zone offset with '%2B' (see
http://www.w3.org/TR/NOTE-datetime).
endTime
minDur
Number (duration in seconds)
Filters based on the billsec value, the duration between
call answer and call end.
maxDur
Example Queries:
The following illustrates the format of queries to accomplish certain requests. In most cases, multiple
different queries will accomplish the same goal, and these examples are not intended to be exhaustive, but

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English