Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
A preview of the “Advanced” settings is shown in the above figure. There are five levels configurations
as described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations
in all levels will take effect for the device. If there are same options existing in different level
configurations with different value configured, the higher level configuration will override the lower level
configuration.
(1) Global Policy
This is the lowest level configuration. The global policy configured in web UI->PBX->Zero
Config->Global Policy will be applied here. Clicking on “Modify Global Policy” to redirect to page
PBX->Zero Config->Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on to add. Multiple global
templates can be selected and users can arrange the priority by adjusting orders via and .
All the selected global templates will take effect. If the same option exists on multiple selected
global templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on to remove the global template from the selected list.
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under web UI->PBX->Zero Config->Model Templates page.
Please see default model template option in [Table 27: Create New Model Template].
(4) Model Templates
Select a model template to be used for the device and click on to add. Multiple global
templates can be selected and users can arrange the priority by adjusting orders via and
. All the selected model templates will take effect. If the same option exists on multiple selected
model templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on to remove the model template from the selected list.
(5) Customize Device Settings
This is the highest level configuration in the “Advanced” settings of the device. Click on “Modify
Customize Device Settings” and following dialog will show.
To Next Page
Loading...