H3C WA Series User Manual

139
Configuring the AP
1. Enable dynamic DNS:
a. Select Network > DNS from the navigation tree.
b. Click the Dynamic tab to enter the page shown in Figure 143.
c. Selec
t the Enable option for Dynamic DNS.
d. Click Apply.
Figure 143 Enable dynamic DNS
2. Configure the IP address of the DNS server:
a. In Figure 143, c
lick Add IP to enter the page for adding a DNS server IP address, as shown
in Figure 144.
b. Enter the IP address 2.1.
1.2.
c. Click Apply.
Figure 144 Add a DNS server IP address
3. Add a domain name suffix:
a. In Figure 143, c
lick Add Suffix.
b. Enter the domain name suffix com as shown in Figure 145.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English