H3C WA Series User Manual

161
Function menu Descri
p
tion User level
Configure SNMP. Configure
Loopback Test
Perform the loopback test on Ethernet
interfaces.
Configure
Network
MAC
MAC
Display MAC address information. Monitor
Create or remove MAC addresses. Configure
Setup
Display and configure MAC address aging
time.
Configure
VLAN
VLAN
Display all VLANs on the device and
information about their member ports.
Monitor
Create, modify, and delete VLANs. Configure
Port
Display VLANs to which a port on the device
belongs.
Monitor
Modify the VLANs to which a port belongs. Configure
ARP
Manage
ment
ARP Table
Display ARP table information. Monitor
Add, modify, or delete an ARP entry. Configure
Gratuitous ARP
Display configuration information of
gratuitous ARP.
Monitor
Configure gratuitous ARP. Configure
IGMP
Snooping
Basic
Display global IGMP Snooping
configuration information and the IGMP
Snooping configuration information in a
VLAN, and view the IGMP Snooping
multicast entry information.
Monitor
Configure IGMP Snooping globally and in a
VLAN.
Configure
Advance
Display the IGMP Snooping configuration
information on a port.
Monitor
Configure IGMP Snooping on a port. Configure
IPv4
Routing
Summary Display the IPv4 active route table. Monitor
Create Create an IPv4 static route. Configure
Remove Delete the selected IPv4 static routes. Configure
IPv6
Routing
Summary Display the IPv6 active route table. Monitor
Create Create an IPv6 static route. Configure
Remove Delete the selected IPv6 static routes. Configure
DHCP DHCP Server
Display the DHCP service status, the DHCP
address pool information, and the DHCP
server status on an interface.
Monitor
Set the DHCP service status, add, modify, or
delete a DHCP address pool, and modify the
DHCP server status on an interface.
Configure

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English