H3C WA Series User Manual

196
Figure 192 Authentication method configuration page
3. Configure authentication methods for different types of users in the domain, as described in Table
78.
4. Click Apply.
A configuration progress dialog box appears.
5. After the configuration progress is complete, click Close.
Table 78 Configuration items
Item Descri
p
tion
Select an ISP
domain
Select the ISP domain for which you want to specify authentication methods.
Default AuthN
Configure the default authentication method and secondary authentication method for all
types of users.
Options include:
• HWTACACS—Performs HWTACACS authentication. You must specify the
HWTACACS scheme to be used.
• Local—Performs local authentication.
• None—Does not perform authentication. This method trusts all users and is not for
general use.
• RADIUS—Performs RADIUS authentication. You must specify the RADIUS scheme to be
used.
• Not Set—The device uses the default authentication setting, which is local
authentication.
Name
Secondary
Method
LAN-access AuthN
Configure the authentication method and secondary authentication method for LAN
access users.
Options include:
• Local—Performs local authentication.
• None—Does not perform authentication. This method trusts all users and is not for
general use.
• RADIUS—Performs RADIUS authentication. You must specify the RADIUS scheme to be
used.
• Not Set—The device uses the settings in the Default AuthN area for LAN access users.
Name
Secondary
Method

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English