H3C WA Series User Manual

8
Figure 6 RADIUS configuration page
4. Configure the parameters as described in Table 7.
Table 7 Configuration items
Item Descri
p
tion
Service Type
Select the type of the RADIUS server.
Two types are available: standard and enhanced:
• extended—Specifies extended RADIUS server, which is usually an iMC server.
In this case, the RADIUS client (access device) and the RADIUS server exchange
packets based on the specifications and packet format definitions of a private
RADIUS protocol.
• standard—Specifies the standard RADIUS server. In this case, the RADIUS
client (access device) and the RADIUS server exchange packets based on the
specifications and packet format definitions of the standard RADIUS protocols
(RFC 2138, RFC 2139, and the u p da tes) .
Authentication IP Enter the IP address of the RADIUS authentication server.
Authentication UDP Port Enter the port number of the RADIUS authentication server.
Authentication Key Enter the shared key of the RADIUS authentication server.
Accounting IP Enter the IP address of the RADIUS accounting server.
Accounting UDP Port Enter the port number of the RADIUS accounting server.
Accounting Key Enter the shared key of the RADIUS accounting server.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English