269
Figure 270 Advanced settings for the clear type wireless service
3. Configure the advanced settings for the clear type wireless service as described in Table 97.
4. Click Apply.
Table 97 Configuration items
Item Descri
tion
Client Max Users
Maximum number of clients of an SSID to be associated with the same radio of the AP.
IMPORTANT:
When the number of clients of an SSID to be associated with the same radio of the AP
reaches the maximum, the SSID is automatically hidden.
Management Right
Web interface management right of online clients.
•
Disable—Disable the web interface management right of online clients.
•
Enable—Enable the web interface management right of online clients.
MAC VLAN
•
Enable—Enable the MAC VLAN feature for the wireless service.
•
Disable—Disable the MAC VLAN feature for the wireless service.
Fast Association
•
Enable—Enable fast association.
•
Disable—Disable fast association.
By default, fast association is disabled.
When fast association is enabled, the device does not perform band navigation and
load balancing calculations for associated clients.
IMPORTANT:
Support for this feature depends on the device model. For more information, see "Feature
matrix."
Configuring security settings for the clear type wireless service
1. Select Wireless Service > Access Service from the navigation tree.
2. Click the icon corresponding to the clear type wireless service.
The page for configuring security settings for the clear type wireless service appears.
To Next Page
Loading...
Need help?
General
