H3C WA Series User Manual

315
b. Select User Access Manager > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to mac, keep the default values for other
parameters, and click Apply.
Figure 331 Add service
3. Add an account.
a. Select the User tab.
b. Select User > All Access Users from the navigation tree to enter the user page.
c. Click Add.
d. On the page that appears, enter username 00146c8a43ff, set the account name and
password both to 00146c8a43ff, select the service mac, and click Apply.
Figure 332 Add account
Verifying the configuration
• During authentication, the client does not need to enter the username or password. After the client
passes MAC authentication, the client can associate with the AP and access the WLAN.
• You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English