H3C WA Series User Manual

314
Figure 329 Add account
Configuring the RADIUS server (iMC v5)
NOTE:
The following takes the iMC (iMC PLAT 5.0 and iMC UAM 5.0) as an example to illustrate the basic
configuration of the RADIUS server.
1. Add an access device.
a. Select the Service tab in the iMC platform.
b. Select User Access Manager > Access Device Management from the navigation tree.
c. Click Add.
d. On the page that appears, enter the shared key 12345678, keep the default values for other
parameters, select or manually add the access device with the IP address 10.18.1.1, and click
Apply.
Figure 330 Add access device
2. Add service.
a. Select the Service tab.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English