H3C WA Series User Manual

313
Figure 327 Add access device
2. Add service.
a. Select the Service tab.
b. Select Access Service > Access Device from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to mac, keep the default values for other
parameters, and click Apply.
Figure 328 Add service
3. Add account.
a. Select the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.
d. On the page that appears, enter a username 00146c8a43ff, add an account and password
00146c8a43ff, select the service mac, and click Apply.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English