H3C WA Series User Manual

354
Figure 388 Configuring an basic IPv4 ACL
3. Configure a basic IPv4 ACL as described in Table 113.
4. Click Add.
Table 113 Configuration items
Item Descri
p
tion
ACL
Select the basic IPv4 ACL for which you want to configure rules.
Available ACLs are basic IPv4 ACLs.
Rule ID
Select the Rule ID option and enter a number for the rule.
If you do not specify the rule number, the system assigns one automatically.
IMPORTANT:
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Action
Select the action to be performed for IPv4 packets matching the rule:
• Permit—Allows matching packets to pass.
• Deny—Drops matching packets.
Check Fragment
Select this option to apply the rule to only non-first fragments.
If you do no select this option, the rule applies to all fragments and non-fragments.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English