H3C WA Series User Manual

70
Table 35 SNMPv1 or SNMPv2c configuration task list
Task Remarks
Enabling SNMP
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations are removed.
Configuring an SNMP view
Optional
After creating SNMP views, you can specify an SNMP view for an
SNMP group to limit the MIB objects that can be accessed by the
SNMP group.
Configuring an SNMP community Required
Configuring SNMP trap function
Optional
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Displaying SNMP packet statistics Optional
SNMPv3 configuration task list
Perform the tasks in Table 36 to configure SNMPv3.
Table 36 SNMPv3 configuration task list
Task Remarks
Enabling SNMP
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations are removed.
Configuring an SNMP view
Optional
After creating SNMP views, you can specify an SNMP view for an SNMP
group to limit the MIB objects that can be accessed by the SNMP group.
Configuring an SNMP group
Required
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the group.
Configuring an SNMP user
Required
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
Configuring SNMP trap function
Optional
Allows you to configure that the agent can send SNMP traps to the NMS,
and configure information about the target host of the SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.
Displaying SNMP packet statistics Optional

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English