H3C WA Series User Manual

76
Figure 68 SNMP group
3. Click Add.
The Add SNMP Group page appears.
Figure 69 Create an SNMP group
4. Configure SNMP group settings as described in Table 40.
5. Click Apply.
Table 40 Configuration items
Item Descri
p
tion
Group Name Set the SNMP group name.
Security Level
Select the security level for the SNMP group. The available security levels are:
• NoAuth/NoPriv: No authentication no privacy.
• Auth/NoPriv: Authentication without privacy.
• Auth/Priv: Authentication and privacy.
Read View Select the read view of the SNMP group.
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English