H3C WA Series User Manual

78
Figure 71 Create an SNMP user
4. Configure SNMP user settings as described in Table 41.
5. Click Apply.
Table 41 Configuration items
Item Descri
p
tion
User Name Set the SNMP user name.
Security Level
Select the security level for the SNMP group. The available security levels
are:
• NoAuth/NoPriv: No authentication no privacy.
• Auth/NoPriv: Authentication without privacy.
• Auth/Priv: Authentication and privacy.
Group Name
Select an SNMP group to which the user belongs.
• When the security level is NoAuth/NoPriv, you can select an SNMP
group with no authentication no privacy.
• When the security level is Auth/NoPriv, you can select an SNMP
group with no authentication no privacy or authentication without
privacy.
• When the security level is Auth/Priv, you can select an SNMP group of
any security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English