H3C WA Series User Manual

82
a. Select Device > SNMP from the navigation tree.
The Setup page appears.
Figure 76 Enable SNMP
b. Select the Enable option.
c. Select the v3 box.
d. Click Apply.
2. Configure an SNMP view.
a. Click the View tab.
b. Click Add.
The page for creating an SNMP view appears.
Figure 77 Create an SNMP view (1)
c. Enter view1 in the field.
d. Click Apply.
The SNMP rule configuration page appears.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English