H3C WA Series User Manual

83
Figure 78 Create an SNMP view (2)
e. Select the Included radio box, enter the MIB subtree OID interfaces, and click Add.
f. Click Apply.
A configuration progress dialog box appears.
Figure 79 Configuration progress dialog box
g. Click Close after the configuration process is complete.
3. Configure an SNMP group.
a. Click the Group tab.
b. Click Add.
The page for creating an SNMP group appears.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English