H3C WA Series User Manual

84
Figure 80 Create an SNMP group
c. Enter group1 in the field of Group Name, select view1 from the Read View box, and select
view1 from the Write View box.
d. Click Apply.
4. Configure an SNMP user
a. Click the User tab.
b. Click Add.
The page in Figure 81 appears.
c. Enter user1 in the field of User Name and select group1 from the Group Name box.
d. Click Apply.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English