Honeywell
95
Login Mode
Figure 3-32 Login Mode
• The Login / Logout key is illuminated.
- Enter the user ID on the numeric keypad, and then press Enter.
- Enter the password on the numeric keypad, and then press Enter.
- Correct mistakes using the Clear Key or key ‘<-’.
- The system will default to Camera mode.
- The system can limit which users are allowed to log in at which keyboards.
- The keyboard functionality is determined by the access that is defined for the
keyboard AND the access that is set for the operator.
• It is not necessary to log out.
Camera Mode
Figure 3-33 Camera Mode
• Switch a camera to the currently selected monitor
- Enter the camera number on the numeric keypad then press Enter.
- Correct mistakes using the ← and Clear keys.
- The Next and Prev keys step through sequential camera numbers.
(Cameras with no video or no access will be “skipped”.)
- Alternate view (If programmed)