Honeywell VideoBloX User Manual

Honeywell
109
6. Repeat steps 3-5 to continue entering commands for this sequence.
7. Click
to remove a record from the sequence.
8. When the sequence definition is complete, select
to save the
sequence to the flash memory.
9. Repeat step 2-6 to define additional sequences.
10. Select
to save/download all information from the current page.
Steps for Editing Sequences
1. On the Sequences screen, select the Editor tab on the right side of the window.
2. Select the Sequence Number to be defined/edited.
3. Modify the sequence steps using the record navigation keys and editing parameter
values as needed.
4. To add/change Commands, click in the Command cell and use the drop-down box to
select an available command.
5. To remove a command line, place the cursor in the command field and click
.
6. Repeat steps 3-5 to continue editing commands for this sequence.
7. Select
to save/download all information from the current page.
Sequences Notes
The Sequences Notes tab is used to enter any notes applicable to the Sequence.
It is helpful to define the sequence in text form; doing so enhances the understanding of
the Sequence.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English