Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
120
GROUP NAME
(COLUMN)
Available groups are displayed in columns.
ACCESS (ROW)
Indicates the groups in which the device is included /
excluded.
Steps for Configuring Device Access
1. From the Devices screen, click on the Access Tab.
2. Set access for each device using the following methods:
• Click on the Access Button to include this device / exclude this device from ALL
groups. (Include = 9 / Exclude = U). Click on Access Button again to toggle
between include/exclude settings.
• Click on a Group column or on an individual cell (in the Access row) on the table
to include this device / exclude this device from the particular group.
(Include = 9 / Exclude = U). Click on the Group again to toggle between
include/exclude settings.
Devices can be in more than one group at a time.
3. Select
to save/download all information from the current page.
Device Group Names
The Alarms Group Names tab is used to set up meaningful groupings/names for alarms.
Figure 3-56 Device – Group Names Configuration

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English