Honeywell VideoBloX User Manual

Honeywell
19
Figure 2-17 Upgrade Completed
NOTE: IP address of NETCPU will be reset to default values after rebooting when
upgrading the Application folder. Default IP address is 192.168.1.9. Therefore, you need
to change your IP address so that it is in the same network segment with the NETCPU if
necessary.
10. To change the login password, click Change Password on the right upper part of the
web page. Figure 2-18 is displayed.
Figure 2-18 Changing Password

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English