Honeywell VideoBloX User Manual

Honeywell
97
- Select the required monitor using the numeric keys, followed by Enter.
- The Next / Prev keys will step through the next / previous monitors to which the
user / keyboard have access.
- The ↑ / ↓ select the next / previous camera to the selected monitor.
High Speed Dome (PTZ) Mode
The PTZ control functionality is only available in Camera Mode or Group Mode.
Figure 3-36 High Speed Dome Mode
• Joystick
- Twist to Zoom
- 18X Optical Zoom – twist joystick clockwise.
- 4x Digital Zoom – momentarily release joystick at end of Optical Zoom – then
twist clockwise.
- Digital Zoom will cause some pixilation in the view.
• Arrow Keys
- Will ‘nudge’ the camera to provide accurate positioning.
Figure 3-37 PTZ Mode
• Auto focus – Special Feature
- The dome will stay in auto-focus until stationary.
- It will switch out of auto-focus after a preset time.
- It will switch back into auto focus after it is moved 10 degrees.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English