Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
96
When there is no number entered, press “Clear” switch to the alternate view and
switch back when release.
Pressing “Enter” will switch to the alternate view.
• Go-Back!
- Press ← repeatedly (4 times) to undo previous camera selection.
• Alter view
- Press ‘Enter’ to switch to alter view if the alter view has set by user when no
digits entered.
- Press ‘Clear’ to switch to the alternate view if the alternate view has been set by
user when no digits entered. Release ‘Clear’ switch to back.
Figure 3-34 Camera Mode
• To select a different monitor while in camera mode
- Enter monitor number using numeric keypad, followed by Mon key.
- The keyboard stays in “Camera” mode.
- The keyboard will display the camera currently selected to that monitor.
• Restricted Access to Monitors
- Cameras have been restricted to be displayed on the Bay monitors only.
- Supervisors “sign-on” will override this to allow any monitor to be selected.
Monitor Mode
Figure 3-35 Monitor Mode
• To enter Monitor Mode, press the Mon key.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English