Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
104
Priority Set the priority for the alarm generated by the time/day event.
Priority can be set to a number between 0 and 255 with 0 being the
highest priority. The sequences are activated based on priority. For
example, if a sequence with priority 3 has a camera switch to a
monitor, and the sequence has locked the monitor, a sequence with
a lower priority (greater than 3) will not be able to switch a camera to
that same monitor.
Sequence Name Drop down box used to select (by name) the sequence to run when
the date/time conditions are met. Sequence name selected
correlates with sequence number.
Sequence Number Drop down box used to select (by number) the sequence to run
when the date/time conditions are met. Sequence number
correlates with sequence name.
Edit Used to edit the selected sequence.
TOD NOTES
Free-form text field. (i.e., further information about the action taken.)
Steps for Configuring a Time of Day Event
1. On the Tods screen, select the TOD Number to define/edit.
2. Enter a Description for the Time of Day Event.
3. Enter a Short Description for the Time of Day Event.
The short description will be used in certain reports.
4. Set the Day of the week for the event. Day can be set as a particular day of the
week (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday),
every day, weekdays, or weekends.
5. Set the Time of day for the event. Use the cursor to select the digits to edit, or tab
between digits. Be sure to verify the AM/PM setting.
6. Check the Enabled box to enable the event sequence when trigger conditions are
met.
7. To run a sequence when the user logs in, check the Enable box.
8. Use either the Sequence Name or Sequence Number dropdown box to select the
Sequence to run. Edit the sequence as needed.
9. Enter notes for this Time of Day Event in the Notes field.
10. Select
to save/download all information from the current page.
MESSAGE
Overview
Messages are used in Sequences to call up specific text on a monitor or keyboard
display. Multiple lines of message text can be displayed to provide detailed information
for an operator. It is normal to create a "library" of messages that would be appropriate
to the application.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English