Honeywell
69
Priority Sets the priority for the alarm generated by the contact
opening.
Sequence Name Drop down box used to select (by name) the sequence to
run when the contact opens. Sequence name correlates
with sequence number.
Sequence Number Drop down box used to select (by number) the sequence to
run when the contact opens. Sequence number correlates
with sequence name.
Edit Used to edit the selected sequence.
CONTACT CLOSE
Enabled When this box is checked, the Sequence is activated when
the Contact Closes.
Priority Sets the priority for the alarm generated by the contact
closing.
Sequence Name Drop down box used to select (by name) the sequence to
run when the contact closes. Sequence name correlates
with sequence number.
Sequence Number Drop down box used to select (by number) the sequence to
run when the contact closes. Sequence number correlates
with sequence name.
Edit Used to edit the selected sequence.
AUTO CAMERA
Enabled Enables the association of a specific camera with this alarm
- for use in alarm queue only.
Camera Number Number of the camera to be displayed on the Alarm Monitor.
Camera number correlates with Camera Name.
Camera Name Camera Name/Description associated with the Camera
Number.
ACCEPT SEQUENCE
Enabled Enables a sequence to be activated when an alarm is
acknowledged (accepted) – for use in alarm queue only.
Sequence Drop down box used to select (by name) the sequence to
run when the alarm is accepted. Sequence name correlates
with sequence number.
Sequence Name Drop down box used to select (by number) the sequence to
run when the alarm Is accepted. Sequence number
correlates with sequence name.
DEFAULT MESSAGE
Enabled Enables the display of a specified message when an alarm
is activated – for use in alarm queue only.
Message Number Message number to be displayed when the alarm is
activated.
Message Text Message to be displayed when the alarm is activated.
To Next Page
Loading...
Need help?
General
