Interval Set the sampling interval.
Sample Type
Set the sampling type:
•
Absolute—Absolute sampling to obtain the value of the
variable when the sampling time is reached.
•
Delta—Delta sampling to obtain the variation value of the
variable during the sampling interval when the sampling
time is reached.
Owner: Set the owner of the alarm entry.
Alarm:
Create Default Event
Select whether to create a default event.
The description of the default event is default event, the action
is log-and-trap, and the owner is default owner.
If there is no event, you can create the default event. And when
the value of the alarm variable is higher than the alarm rising
threshold or lower than the alarm falling threshold, the system
adopts the default action log-and-trap.
Rising Threshold Set the alarm rising threshold.
Rising Event
Set the action that the system takes when the value of the alarm
variable is higher than the alarm rising threshold.
If you select the Create Default Event box, this option is not
configurable.
Falling Threshold Set the alarm falling threshold.
Falling Event
Set the action that the system takes when the value of the alarm
variable is lower than the alarm falling threshold.
If you select the Create Default Event box, this option is not
configurable.
Displaying RMON statistics
1. Select Device > RMON from the navigation tree.
The page in Figure 80 appears.
2. Click the icon for the statistics entry of an interface.
To Next Page
Loading...
Need help?
General
