HP 1920 Gigabit Ethernet Switch Series User Manual

356
Item Descri
p
tion
LAN-access AuthN
Name
Secondary Method
Configure the authentication method and secondary authentication method for LAN
access users.
Options include:
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for LAN access
users.
Login AuthN
Name
Secondary Method
Configure the authentication method and secondary authentication method for login
users.
Options include:
• HWTACACS—HWTACACS authentication. You must specify the HWTACACS
scheme to be used.
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for login users.
Configuring authorization methods for the ISP domain
1. Select Authentication > AAA from the navigation tree.
2. Click the Authorization tab.
Figure 337 Authorization method configuration page
3. Select the ISP domain and specify authorization methods for the ISP domain, as described in Table
110.
4. Click Apply.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English