HP 1920 Gigabit Ethernet Switch Series User Manual

425
Figure 410 Port security configuration
3. Configure global port security settings as described in Table 128.
4. Click Apply.
Table 128 Configuration items
Item Descri
p
tion
Enable Port Security
Specifies whether to enable the port security feature globally.
By default, port security is disabled.
Advanced
Configures intrusion protection actions globally.
Intrusion protection actions:
• Temporarily Disabling Port Time—Sets the time length for how long the port is
disabled temporarily upon receiving illegal frames. Traps Switch—Selects one or
more events to trigger trap sending. The following is the available events:
{ MAC Learned.
{ 802.1X-Auth Failure.
{ 8021X Logoff.
{ 802.1X Logon.
{ Intrusion.
{ MAC-Auth Failure.
{ MAC-Auth Logoff.
{ MAC-Auth Logon.
Configuring basic port security control
1. From the navigation tree, select Authentication > Port Security.
On the Port Security page, the Security Ports And Secure MAC Address List area displays the port
security control settings, as shown in Figure 411.
Figure 411 Security Ports And Secure MAC Address Li
st area
2. Click Add.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English