HP 1920 Gigabit Ethernet Switch Series User Manual

428
Table 130 Configuration items
Item Descri
p
tion
Port Selects a port where the secure MAC address is configured.
Secure MAC Address Enters the MAC address that you want to configure as a secure MAC address.
VLAN ID
Enters the ID of the VLAN in which the secure MAC address is configured.
The VLAN must already exist on the selected port.
Configuring advanced port security control
1. From the navigation tree, select Authentication > Port Security.
The Port Security page appears.
2. In the Advanced Port Security Configuration area, click Ports Enabled With Advanced Features.
Figure 415 Ports Enabled With Advanced Features area
3. Click Add.
The page for configuring advanced port security control appears.
Figure 416 Configuring advanced port security control
4. Configure advanced port security control as described in Table 131.
5. Click Apply.
Table 131 Configuration items
Item Descri
p
tion
Port
Selects a port where you want to configure port security.
By default, port security is disabled on all ports, and access to the ports is not restricted.
Security Mode
Selects a port security mode.
For more information about advanced security modes, see Table 127.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English