HP 1920 Gigabit Ethernet Switch Series User Manual

31
Use upgrade server-address source-filename runtime to upgrade the system software image file. If the
system software image file in the downloaded software package file is not applicable, the original
system software image file is still used as the startup configuration file.
To validate the downloaded software package file, reboot the device.
NOTE:
The HP 1920 Switch Series does not provide an independent Boot ROM image; instead, it integrates the
Boot ROM image with the system software image file together in a software package file with the
extension name of .bin.
Examples
# Download software package file main.bin from the TFTP server and use the Boot ROM image in the
package as the startup configuration file.
<Sysname> upgrade 192.168.20.41 main.bin bootrom
# Download software package file main.bin from the TFTP server and use the system software image file
in the package as the startup configuration file.
<Sysname> upgrade 192.168.20.41 main.bin runtime
upgrade ipv6
Syntax
upgrade ipv6 server-address source-filename { bootrom | runtime }
Parameters
server-address: IPv6 address of a TFTP server.
source-filename: Software package name on the TFTP server.
bootrom: Specifies the Boot ROM image in the software package file as the startup configuration file.
runtime: Specifies the system software image file in the software package file as the startup configuration
file.
Description
Use upgrade ipv6 server-address source-filename bootrom to upgrade the Boot ROM image. If the Boot
ROM image in the downloaded software package file is not applicable, the original Boot ROM image
is still used as the startup configuration file.
Use upgrade ipv6 server-address source-filename runtime to upgrade the system software image file. If
the system software image file in the downloaded software package file is not applicable, the original
system software image file is still used as the startup configuration file.
To validate the downloaded software package file, reboot the device.
NOTE:
The HP 1920 Switch Series does not provide an independent Boot ROM image; instead, it integrates the
Boot ROM image with the system software image file together in a software package file with the
extension name of .bin.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English