HP 1920 Gigabit Ethernet Switch Series User Manual

120
Configuring an SNMP user
1. Select Device > SNMP from the navigation tree.
2. Click the User tab.
The User tab appears.
Figure 110 SNMP user
3. Click Add.
The Add SNMP User page appears.
Figure 111 Creating an SNMP user
4. Configure the SNMP user as described in Table 37.
5. Click Apply.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English