HP 1920 Gigabit Ethernet Switch Series User Manual

444
Authorized IP configuration example
Network requirements
In Figure 440, configure Switch to deny Telnet and HTTP requests from Host A, and permit Telnet and
HTTP requests from Host B.
Figure 440 Network diagram
Configuration procedure
1. Create an ACL:
a. From the navigation tree, select QoS > ACL IPv4.
b. Click Create.
c. Enter 2001 for ACL Number.
d. Click Apply.
Figure 441 Creating an ACL
2. Configure an ACL rule to permit Host B:

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English