HP 1920 Gigabit Ethernet Switch Series User Manual

424
Ste
p
Remarks
1. Configuring global settings for
port security
Required.
This function enables port security globally and configures intrusion
protection actions.
By default, port security is disabled globally.
2. Configuring advanced port
security control
Required.
This function configures the advanced port security mode, intrusion
protection action, or outbound restriction, and selects whether to
ignore the authorization information from the RADIUS server.
By default, port security is disabled on all ports, and access to the ports
is not restricted.
3. Configuring permitted OUIs
Optional.
This setting is available only for the 802.1X MAC Based Or OUI
mode.
You can configure up to 16 permitted OUI values. A port in this mode
allows only one 802.1X user and one user whose MAC address
contains the specified OUI to pass authentication at the same time.
By default, no OUI values are configured.
Configuring global settings for port security
1. From the navigation tree, select Authentication > Port Security.
Figure 409 Port security configuration page
2. In the Port Security Configuration area, click Advanced.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English