tion
VLAN Customer VLAN
Define a rule to match customer VLAN IDs.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure only one VLAN ID at a time. Otherwise, the relevant QoS
policy fails to be applied. If the same VLAN ID is specified multiple times, the
system considers them as one. The relationship between different VLAN IDs is
logical OR.
ACL
ACL IPv4 Define an IPv4 ACL-based rule.
ACL IPv6 Define an IPv6 ACL-based rule.
Adding a traffic behavior
1. Select QoS > Behavior from the navigation tree.
2. Click the Add tab to enter the page for adding a traffic behavior.
Figure 465 Adding a traffic behavior
3. Add a traffic behavior as described in Table 153.
4. Click Add.
Table 153 Configuration items
Item Descri
To Next Page
Loading...
Need help?
General
