HP 1920 Gigabit Ethernet Switch Series User Manual

403
Authentication > Certificate Management > CRL from the navigation tree to view detailed information
about the retrieved CRL.
Configuration guidelines
When you configure PKI, follow these guidelines:
• Make sure the clocks of entities and the CA are synchronous. Otherwise, the validity period of
certificates will be abnormal.
• The Windows 2000 CA server has some restrictions on the data length of a certificate request. If the
PKI entity identity information in a certificate request goes beyond a certain limit, the server will not
respond to the certificate request.
• The SCEP plug-in is required when you use the Windows Server as the CA. In this case, specify RA
as the authority for certificate request when you configure the PKI domain.
• The SCEP plug-in is not required when you use the RSA Keon software as the CA. In this case,
specify CA as the authority for certificate request when you configure the PKI domain.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English