HP 1920 Gigabit Ethernet Switch Series User Manual

63
4. Click Apply.
Table 13 Configuration items
Item Descri
p
tion
IPv4/Domain
Specify the IPv4 address or domain name
of the log host.
IMPORTANT:
You can specify up to four log hosts.
Loghost IP/Domain
IPv6
Set the IPv6 address of the log host.
Loghost IP
Setting buffer capacity and refresh interval
1. Select Device > Syslog from the navigation tree.
2. Click the Log Setup tab.
The syslog configuration page appears.
Figure 52 Syslog configuration page
3. Configure buffer capacity and refresh interval as described in Table 14.
4. Click Apply.
Table 14 Configuration items
Item Descri
p
tion
Buffer Capacity Set the number of logs that can be stored in the log buffer.
Refresh Interval
Set the log refresh interval.
You can select manual refresh or automatic refresh:
• Manual—Click Refresh to view the latest log information.
• Automatic—Select to refresh the Web interface every 1 minute, 5 minutes, or 10
minutes.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English