HP 1920 Gigabit Ethernet Switch Series User Manual

176
Creating a static MAC address entry
1. Select Network > MAC from the navigation tree.
By default, the MAC tab is displayed.
2. Click Add.
3. Configure a MAC address entry:
a. Type MAC address 00e0-fc35-dc71.
b. Select static from the Type list.
c. Select 1 from the VLAN list.
d. Select GigabitEthernet1/0/1 from the Port list.
4. Click Apply.
Figure 172 Creating a static MAC address entry

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English