HP 1920 Gigabit Ethernet Switch Series

455
Table 138 Configuration items
Item Descri
p
tion
ACL Number Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order that the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv4 ACL
1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Basic Setup tab.
The rule configuration page for a basic IPv4 ACL appears.
Figure 447 Configuring a basic IPv4 ACL
3. Configure a rule for a basic IPv4 ACL.
4. Click Add.