HP 1920 Gigabit Ethernet Switch Series User Manual

483
Item Descri
p
tion
CIR Set the committed information rate (CIR), the average traffic rate.
CBS
Set the committed burst size (CBS), number of bytes that can be sent in
each interval. This function is not supported in the current software
version, and it is reserved for future support.
Red
Discard
Set the action to perform for exceeding packets.
After selecting the Red box, you can select one of the following options:
• Discard—Drops the exceeding packet.
• Pass—Permits the exceeding packet to pass through.
This function is not supported in the current software version, and it is
reserved for future support.
Pass
Filter
Configure the packet filtering action.
After selecting the Filter box, select one item in the following list:
• Permit—Forwards the packet.
• Deny—Drops the packet.
• Not Set—Cancels the packet filtering action.
Adding a policy
1. Select QoS > QoS Policy from the navigation tree.
2. Click the Add tab to enter the page for adding a policy.
Figure 468 Adding a policy
3. Add a policy as described in Table 156.
4. Click Add.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English