tion
Policy Name
Specify a name for the policy to be added.
Some devices have their own system-defined policies. The policy name you specify
cannot overlap with system-defined ones. The system-defined policy is the policy default.
Configuring classifier-behavior associations for the
policy
1. Select QoS > QoS Policy from the navigation tree.
2. Click Setup to enter the page for setting a policy.
Figure 469 Setting a policy
3. Configure a classifier-behavior association for a policy as described in Table 157.
4. Click Apply.
Table 157 Configuration items
Item Descri
tion
Please select a policy
Select an existing policy in the list.
Classifier Name
Select an existing classifier in the list.
Behavior Name
Select an existing behavior in the list.
Applying a policy to a port
1. Select QoS > Port Policy from the navigation tree.
2. Click Setup to enter the page for applying a policy to a port.
To Next Page
Loading...
