HP 1920 Gigabit Ethernet Switch Series User Manual

394
Figure 373 Key pair parameter configuration page
Destroying the RSA key pair
1. From the navigation tree, select Authentication > Certificate Management.
2. Click the Certificate tab.
3. Click Destroy Key.
4. Click Apply to destroy the existing RSA key pair and the corresponding local certificate.
Figure 374 Key pair destruction page
Retrieving and displaying a certificate
You can retrieve an existing CA certificate or local certificate from the CA server and save it locally. To
do so, you can use offline mode or online. In offline mode, you must retrieve a certificate by an
out-of-band means like FTP, disk, email and then import it into the local PKI system. By default, the
retrieved certificate is saved in a file under the root directory of the device, and the filename is
domain-name_ca.cer for the CA certificate, or domain-name_local.cer for the local certificate.
To retrieve a certificate:
1. From the navigation tree, select Authentication > Certificate Management.
2. Click the Certificate tab.
3. Click Retrieve Cert.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English