395
Figure 375 PKI certificate retrieval page
4. Configure the parameters, as described in Table 122.
5. Click Apply.
Table 122 Configuration items
Item Descri
tion
Domain Name
Select the PKI domain for the certificate.
Certificate Type
Select the type of the certificate to be retrieved, which can be CA or local.
Enable Offline
Mode
Click this box to retrieve a certificate in offline mode (that is, by an out-of-band means like
FTP, disk, or email), and then import the certificate into the local PKI system.
The following configuration items are displayed if this box is selected.
Get File From
Device
Specify the path and name of the certificate file to import:
• If the certificate file is saved on the device, select Get File From Device and then specify
the path and name of the file on the device. If no file is specified, the system, by
default, gets the file domain-name_ca.cer (for the CA certificate) or
domain-name_local.cer (for the local certificate) under the root directory of the device.
• If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path and name of the file and specify the partition that saves the file..
Get File From PC
Password
Enter the password for protecting the private key, which was specified when the
certificate was exported.
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate.
To Next Page
Loading...
Need help?
General
