Attribute
23 Framed-IPX-Network 70 ARAP-Password
24 State 71 ARAP-Features
25 Class 72 ARAP-Zone-Access
26 Vendor-Specific 73 ARAP-Security
27 Session-Timeout 74 ARAP-Security-Data
28 Idle-Timeout 75 Password-Retry
29 Termination-Action 76 Prompt
30 Called-Station-Id 77 Connect-Info
31 Calling-Station-Id 78 Configuration-Token
32 NAS-Identifier 79 EAP-Message
33 Proxy-State 80 Message-Authenticator
34 Login-LAT-Service 81 Tunnel-Private-Group-id
35 Login-LAT-Node 82 Tunnel-Assignment-id
36 Login-LAT-Group 83 Tunnel-Preference
37 Framed-AppleTalk-Link 84 ARAP-Challenge-Response
38 Framed-AppleTalk-Network 85 Acct-Interim-Interval
39 Framed-AppleTalk-Zone 86 Acct-Tunnel-Packets-Lost
40 Acct-Status-Type 87 NAS-Port-Id
41 Acct-Delay-Time 88 Framed-Pool
42 Acct-Input-Octets 89 (unassigned)
43 Acct-Output-Octets 90 Tunnel-Client-Auth-id
44 Acct-Session-Id 91 Tunnel-Server-Auth-id
NOTE:
This table lists the attribute types, which are defined by RFC 2865, RFC 2866, RFC 2867, and RFC
2568.
Extended RADIUS attributes
Attribute 26 (Vendor-Specific), an attribute defined by RFC 2865 allows a vendor to define extended
attributes to implement functions that the standard RADIUS protocol does not provide.
A vendor can encapsulate multiple sub-attributes as TLVs in attribute 26 to provide extended functions. As
shown in Figure 349, a sub-at
tribute encapsulated in Attribute 26 consists of the following parts:
• Vendor-ID—ID of the vendor. Its most significant byte is 0. The other three bytes contains a code
that is compliant to RFC 1700.
• Vendor-Type—Type of the sub-attribute.
• Vendor-Length—Length of the sub-attribute.
• Vendor-Data—Contents of the sub-attribute.
To Next Page
Loading...
Need help?
General
