HP 1920 Gigabit Ethernet Switch Series

81
2. Click Add to enter the page for adding a mirroring group.
Figure 66 Adding a mirroring group
3. Configure the mirroring group as described in Table 16.
4. Click Apply.
Table 16 Configuration items
Item Descri
p
tion
Mirroring Group ID ID of the mirroring group to be added.
Type
Specify the type of the mirroring group to be added as Local, which indicates
adding a local mirroring group.
Configuring ports for the mirroring group
1. From the navigation tree, select Device > Port Mirroring.
2. Click Modify Port to enter the page for configuring ports for a mirroring group.