HP 1920 Gigabit Ethernet Switch Series User Manual

50
Configuring basic device settings
The device basic information feature provides the following functions:
• Set the system name of the device. The configured system name is displayed on the top of the
navigation bar.
• Set the idle timeout period for logged-in users. The system logs an idle user off the Web for security
purpose after the configured period.
Configuring system name
1. Select Device > Basic from the navigation tree.
The system name configuration page appears.
Figure 38 Configuring the system name
2. Enter the system name.
3. Click Apply.
Configuring idle timeout period
1. Select Device > Basic from the navigation tree.
2. Click the Web Idle Timeout tab.
The page for configuring idle timeout period appears.
Figure 39 Configuring the idle timeout period

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English